I5 Plus Smart Bracelet IP67 Bluetooth 4.0 Watch Wristband with Sleep Monitor & Sports Tracker & Remote Camera
Note: The color of the word on the screen is random.Multifunctional smart wristband
operation, extraordinary experience!
You just need to turn over your wrist or touch the screen to switch the interface;
0.91 inch OLED touch screen can show 32 characters in large font. With I5 Plus on your wrist, you can know who is calling and who sent message to you etc..
The bracelet will sync data automatically after connected with phone by APP (Zeroner), the bracelet time will be calibrated as same as the time of phone. Data Synchronism includes: Steps, calorie, distance. You can check if the data synchronism is completed successfully on the APP. It will take 1 - 2 minutes to sync data for the first time. Data synchronism can be done manually by clicking the refresh button on APP too.
It can be used as a tool to avoid insufficient or excessive exercise by measuring calories consumption based on collected data, such as number of steps, distance, speed, time etc. to control exercise.
Start sleep mode: The bracelet will distinguish if the wearer is sleep or awake everyday time 20:00 to 09:00, if the wearer sleep, then the bracelet will start sleep monitor mode automatically.
Exit sleep mode: When the wearer awake and move around 1 minute, the bracelet will exit sleep monitor mode automatically and back to time display.
You can control the camera of you cell phone to take pictures.
Call and message reminding
When a call or message is coming, you can check it without taking out of your mobile phone.
Note: The language showing function (include incoming call shows, message checking) only supports English and Chinese, other languages are not supported.
Many office workers often sit for eight hours, causing physical overload. The watch especially added sedentary alerts function. When you sit down and start to work, turn on this feature, select a specific working time. Until the time comes, the watch will automatically send reminders to prompt the owner of that the status will be a break up.
Find your phone
When the function is turned on, your mobile phone will ring or vibrate when the distance between smart watch and phone is a certain distance.
The smart wristband only supports the following mobile devices:
iOS system: Must be iOS 7.0 or later, Bluetooth 4.0; Such as: iPhone 4S / 5 / 6, iPod touch 5, etc.;
Android system: Must be Android 4.3 or later, Bluetooth 4.0; Such as: Samsung S4, Note 3,etc..
You can scan the QR to download APP:
iOS users - Android users -
Bracelet operating instructions
You can use the bracelet by Gesture Control or Touching the Screen.
It is convenient to check the time by wrist gesture.
Questions and Answers
1. Q: When connected with App, the data synchronism is finished but the bracelet time display is still incorrect?
A: Reset the bracelet and try data synchronism again.
2. Q: After the bracelet connected with APP, why the bracelet didn’t show call ID when the call coming?
A: Android phones: After connected with bracelet with APP, please allow Zeroner to visit calls, SMS, contacts and keep Zeroner running in background. If there are security software on your phone,set the software Zeroner as trust;
iOS phones: If your phone is iPhone, please restart your phone and connect the bracelet again.When connect please wait until the phone pop up Bluetooth pairing request and click Pair, the call ID display function will come.
3. Q: The bracelet icon shows the Bluetooth was connected, but the APP cannot sync data?
A: Generally it is caused by the Bluetooth of the phone. Please switch off the APP firstly, restart the Bluetooth and repair. If the above step does not work, please restart your phone and try again.
4. Q: Why my bracelet lose connection with my phone frequently?
A: Please check if your phone or other security software sets Zeroner as trusted APP or not. If not, please set it as trusted APP and try again.
Bluetooth version: Bluetooth 4.0People: Unisex table
Waterproof Rating : IP67
Screen type: OLED
Battery Capacity: 75mAh
Standby time: About 5 - 7 days
Case material: PC
Band material: TPU
The dial diameter: 1.9 cm / 0.75 inches
The band width: 1.9 cm / 0.75 inches
Product size (L x W x H): 22.00 x 1.90 x 0.90 cm / 8.66 x 0.75 x 0.35 inches
Package size (L x W x H): 20.00 x 10.00 x 4.00 cm / 7.87 x 3.94 x 1.57 inches
FAQ for Smart Watch and Wristband
1. Q: I can’t charge my watch / bracelet and it doesn’t power on, what should I do?
A: If this is the first time you’ve charged your watch / bracelet, please use the adapter to power it, charge it for more than 3 hours, then press the button to start it;
If you have not used the watch / bracelet for a long time without charging it, the battery would have opened the UVP function. In this situation, you need to activate the battery before using. (You can go to the phone repair shop to activate the battery).
2. Q: Why can’t I connect with Bluetooth?
A: 1. If the phone's Bluetooth version is lower than the watch's / bracelet’s, they will
not be able to pair;
2. If the phone's Bluetooth version is equal to or higher than the watch's / bracelet’s, but is initially unable to pair, then you need to clear the Bluetooth connection history on the phone, scan and re-connect again.
3. Q: The watch / bracelet icon shows that it has paired over Bluetooth, however the APP cannot sync data. How do I resolve this?
A: Generally it is caused by the Bluetooth of the phone. Please close the APP first, restart the Bluetooth connection and re-pair the two devices. If the above step does not work, please restart your phone and try to pair the devices again.
4. Q: Why does my watch / bracelet frequently lose connection with my phone?
A: Please check if your phone or other security software has set the APP as a trusted APP or not. This is required to pair the two devices. If it hasn’t, please set it as trusted APP and try again.
5. Q: Why am I unable to connect with the APP?
A: Please making sure the OS of your phone is within the range that the smart watch / bracelet supports.