HD Mini Tiny mini DV mini Small Camera Outdoor Movement Thumb Logger black one size
Product No: 813913
Mini DV Instructions for use:
Compact and stylish design, the product of the whole machine UV spray, fashion wear; with a variety of portable tools
Support webcam, with network chat function
Support AVI video format
In low light, can be high-definition video 720X480 30 frames / sec and 320X240 30 frames / sec network video output
Support the ordinary USB1.1 and high-speed transmission USB2.0 interface
Can support 16GB TF card
Camera work time is full of electricity between 1 hour.
two. Operation guide
This unit has a built-in rechargeable lithium battery. When using the unit for the first time, charge it first. MINI DV can be charged in the following ways:
1), connect the computer to charge, use the USB data cable and computer connection, you can charge
2), with a charger to charge, with the USB data cable and the charger seat connection, then plug the plug into the electrical outlet, you can charge.
When charging, the green light and red light are the same, are in a quiescent state.
Note: When the battery power is low, it will directly enter the protection state, can not boot. In this case, charge the unit.
Boot and camera
Press the Power button, the green indicator light, the machine is ready to boot, and immediately converted to standby. Press the top Record / Stop button, the green light is on, the red light starts to slow flash, the machine starts to take pictures, the video file resolution is: 720X480, the frame number is 30fps / S. And then press the Record / Stop button, stop recording, and automatically save the file, save the red light remains steady, if you want to continue recording, please press the Record / Stop button again.
a. Make sure you have inserted the T-flash (Micro SD) card,
b. If not inserted, it will shut down automatically after 30 seconds
d.T-flash (Micro SD) use capacity of 16GB.
e. File retention takes some time,
f. Do not press the operation key while saving,
g. This will cause the recorded file to not be saved and make the resulting file incomplete.
j. Please place the lens in the environment with plenty of lighting,
l. Stay more than 50cm away from the subject, so that you will get the correct, natural color, clear scenery, stable images.
3. voice camera
Tap the Power button, the blue light is on. At this point, press the MODE key to switch to the voice recording mode. At this time, the blue light is on and the red light is flashing (indicating the voice standby mode). When the recording live sound more than 60 dB, D001 began to automatically record, this time the blue light is always bright, red light slow flash (indicating voice control).
After each recording, the recording time is short and the recording time is 2 minutes. If the recording is silent after 2 minutes, the recording file will be saved automatically and the standby mode will be saved. If the recording is 2 minutes After the scene is still sound, will continue to record for some time.
4. time setting
In the product attachment CD-ROM, which has a document for the time synchronization file, please copy this file to the TF card, the machine and connected to the computer, the machine time will be synchronized directly into the computer display time.
Specific usage is as follows:
1, in the root directory of the card under a new file named TAG.TXT text document
2, open the TAG.TXT document, in strict accordance with the format of the attachment, write the time to be synchronized
The specific format is as follows:
[date] <- space wrapping
2009/07/22 <- need space for line
Each time the system starts, the system will self-test and analyze the TAG.TXT document, and according to the time inside, set the system time, set, the system will automatically delete this document!
5. Shut down
In the camera state or standby mode, often press the Power button for 3 seconds, release the button, until the light goes off, that the machine has been shut down
6. Connect to the computer
In the shutdown state, standby state or camera status, can be directly connected to the computer, connected to the computer can be used as a U disk, free copy of the file, cut and paste, delete.
The machine will be inserted into the computer USB port, a few seconds after the computer will pop up removable disk logo, red light is always on, the green light in the flash after the moment to light.
a. If the computer is not recognized after the unit is connected to the computer, or if the removable disk ID is not displayed after 30 seconds, please re-insert it once.
b. It is recommended to copy or cut the recorded video file to the hard disk of the computer and play it back and play the video file stored in the built-in memory of the VCR. The video file may be too large and the transmission can not keep up. Not smooth.
7. Computer camera function:
Please install the driver for the first time before applying it to a computer camera. The driver named SPCA1528_V2220_M ... Setup.exe, on the CD included with the CD, double-click the file, follow the installation prompts to complete the installation, after installation on the computer desktop to form an AMCAP icon.
In the shutdown or power state, with the USB cable to connect the machine and the computer, the status of U disk mode, short press MODE button, then switch to the computer camera mode, click the AMCAP icon, you can when the computer camera